Need help?Do you have a question about the Ebyte E32-DTU and is the answer not in the manual?
General| Model | E32-DTU |
|---|---|
| Category | Modem |
| Transmission Power | 30dBm |
| Baud Rate | 1200-115200 bps |
| Interface | UART |
| Operating Temperature | -40°C to +85°C |
| Frequency Range | 433MHz (410-441MHz) |
Provides a concise summary of the device's capabilities and purpose.
Highlights the key technical advantages and attributes of the wireless data transceiver.
Details the essential components needed for the device's initial setup and use.
Describes the physical layout and components of the E32-DTU (433NW20) unit.
Provides the physical measurements and size specifications of the device.
Explains how to connect and utilize the device's power supply interface.
Describes the connection and function of the RS232 serial communication interface.
Details the connection and function of the RS485 serial communication interface.
Lists specific model details including frequency, power, and distance.
Provides a table of general physical and electrical parameters for the device.
Specifies the operational frequency bands and available communication channels.
Details the different power output levels the device can operate at.
Describes the wireless communication speeds supported by the transceiver.
Outlines the power consumption of the device in different operating states.
Explains data buffer size and how data is packaged for transmission.
Lists the factory pre-set configuration values for the device.
Explains how to retrieve the current configuration settings of the device.
Describes the procedure to obtain the device's firmware version information.
Provides instructions for performing a system reset on the device.
Details the commands used to modify the device's operational parameters.
Explains configuration options for serial port and air interface speeds.
Details settings related to network grouping and channel selection.
Outlines various optional settings that affect communication behavior.
Shows a visual representation of the programming connection setup.
Guides the user on how to configure device parameters using software.
Provides examples of how the data transceiver can be used in various systems.
To Next Page
