Chengdu Ebyte Electronic Technology Co.,Ltd. E890-868LG12 User Manual
Copyright ©2012–2022
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
15
5.3.2 Dynamic DNS
In the Services --> Dynamic DNS option, users can add a domain name resolution service to set up the gateway
remotely, etc., as shown in the figure below.
In the dynamic settings interface, certain DDNS service providers are already pre-configured in the drop-down
menu in DDNS Service Providers, if the DDNS service provider selected by the customer is not in the drop-down box,
you can choose to customize it.
Dynamic DNS is not enabled by default, please click to enable it first before using this feature.
After modifying, please restart the gateway to ensure it works properly.
Customers need to strictly fill in the parameters filled in to set up DDNS to ensure that the network matches
properly.
DDNS is also available under multi-level routing.
If the network where the gateway is located is not assigned a separate public IP, then this function will not work.
Off-site access to the gateway intranet can be achieved if the relevant port mapping is set up in the firewall.
Multiple dynamic domain names can be added to the gateway.
5.3.3 WAN/LAN
In Service --> WAN/LAN option, user can set the working mode of Network Port 1 (default is WAN port) as WAN
port or LAN port, click Save and Apply, the device will take effect after reboot. 4G mode can set Network Port 1 as LAN
port to achieve LAN output. The specific settings are shown in the figure below.
To Next Page
Loading...
Need help?
General
