Ebyte ME31-AAAX2240 - Parameter Setting

Chengdu Ebyte Electronic Technology Co.,Ltd. ME31-AAAX2240_UserManul_EN
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd 29
5.2 Parameter setting
Step1: For connecting devices, refer to "Acquisition and Control"
Step2: Select advanced configuration, you can configure device information, baud rate parameters, Ethernet
parameters
Step3: Configure module parameters, Modbus address (When configuration is required)
Device name: configure the device name to distinguish the device, supports a maximum of 15 Bit;
Offset address: Modbus address of the device, effective immediately;