Ecco 40S - User Manual

9836 0155 14
2009–05
Spare parts list for
Low Pressure Spray Guns
ESL 12/01-04
Ecco 40S, -401S,
-402S
Spray gun type: S = Stainless steel version.
Ecco 40S
Pressure feed
Ecco 40S
Suction feed
Ecco 401S
Suction feed
with suction cup
Ecco 402S
Gravity feed
65130 F225
65130 F226
65130 F234
65130 F228
Ecco 40
ECCO FINISHING AB
NACKA - SWEDEN
Made in Sweden
Ecco 40
ECCO FINISHING AB
NACKA - SWEDEN
Made in Sweden
Ecco 40
ECCO FINISHING AB
NACKA - SWEDEN
Made in Sweden
Ecco 40
ECCO FINISHING AB
NACKA - SWEDEN
Made in Sweden
Suction feed guns
Paint nozzle Prod. No.
Orifice diam., With paint needle
Type of gun mm Air cap of nylon
Ecco 40 1,3 273 8611 4000 13
Ecco 40 1.5 273 8611 4000 15
Ecco 40 1.8 271 8611 4000 18
Ecco 40S 1,3 273 8611 4005 13
Ecco 40S 1.5 273 8611 4005 15
Ecco 40S 1.8 271 8611 4005 18
For further combinations, consult Ecco Finishing AB
Suction feed guns
Paint nozzle Prod. No.
Orifice diam., With paint needle
Type of gun mm Air cap of nylon
Ecco 401 1,2 170 8611 4010 12
Ecco 401 1.5 273 8611 4010 15
Ecco 401 1.8 271 8611 4010 18
Ecco 401 1.8 275 8611 4010 38
Ecco 401 1.8 375 8611 4010 21
For further combinations, consult Ecco Finishing AB
Gravity feed guns with gravity cup 0.5 lit.
Paint nozzle Prod. No.
Orifice diam., With paint needle
Type of gun mm Air cap of nylon
Ecco 402S 1,2 170 8611 4020 12
Ecco 402S 1.3 273 8611 4020 13
Ecco 402S 1.5 275 8611 4020 35
Ecco 402S 1.8 271 8611 4020 18
Ecco 402S 1.8 275 8611 4020 38
Ecco 402S 2.1 375 8611 4020 21
For further combinations, consult Ecco Finishing AB
II 2 G
Pressure feed guns
Paint nozzle Prod. No. Prod. No. With
Orifice diam., With paint needle paint needle tip
Type of gun mm Air cap of nylon of tungsten-carbide
Ecco 40S 1,1 T274 8611 6013 60
Ecco 40S 1,1 T278 8611 4040 11
Ecco 40S 1.3 T272 8611 4040 13
Ecco 40S 1.3 T274 8611 6013 63
Ecco 40S 1.5 T274 8611 6013 62
Ecco 40S 1.8
a
T272 8611 6023 59
Ecco 40S 1.8 T272 8611 4040 18
Ecco 40S 2.1
a
T374 8611 6013 61
Ecco 40S 2.7 T474 8611 4040 27
a
Tungsten-carbide design
For further combinations, consult Ecco Finishing AB
ECCO FINISHING AB, Box 93, S-532 22 SKARA, Sweden
Tel: +46 (0)511-134 45, Fax: +46 (0)511-180 13
E-mail: info@eccofinishing.com • www.eccofinishing.com
ECCO
ECCO FINISHING

Summary

Ecco 40 S Pressure Feed Parts

Ecco 40 S Suction Feed Parts

Ecco 401 S Suction Feed Parts

Ecco 402 S Gravity Feed Parts

Nozzle Sets

Pressure Feed Nozzle Sets

Lists nozzle sets for pressure feed spray guns, including air cap, paint nozzle, and paint needle types with part numbers.

Suction and Gravity Feed Nozzle Sets

Details nozzle sets for suction and gravity feed guns, specifying air cap, paint nozzle, and paint needle combinations with part numbers.

Nozzle Combinations

Operators Instructions

Principal Data and Warnings

Provides gun specifications, safety warnings regarding static electricity, chemical use, and pressure handling.

Paint Spraying Operation

General Operation Guidelines

Instructions on installing, operating, cleaning, and maintaining the spray gun for optimal performance.

Disassembly and Reassembly

Step-by-step guide for disassembling and reassembling gun components, including needle packing and distributor ring.

Troubleshooting Guide

Spray Pattern Analysis and Solutions

Identifies common spray pattern issues, their causes, and recommended remedies for correct spray patterns.

Paint and Air Leaking Issues

Addresses causes and solutions for paint leaking and air leaking from the spray gun during operation.

Ecco 40S Specifications

General

Type	Airless
Maximum Pressure	3000 PSI
Flow Rate	0.38 GPM
Hose Length	15 m
Weight	14.5 kg