Echelon ROW - Page 14

14
ASSEMBLY
9. Tighten screws with hex key.8. Place the four screws into rail
and hand tighten.
10. Align front foot with screw
holes on the rail and hand
tighten screws into the foot.
11. Tighten screws with hex key.
13. Tighten screws with hex key.
Repeat with left foot carriage.
12. Align the right foot carriage
with the screw holes on the
body of the rower and hand
tighten the three screws.
ASSEMBLY
ANGLE AWAY
FROM ROW