29
29
Locate leveling feet.
NOTE: Same instructions apply for both sides of treadmill.
Loosen wing nut by rotating counter clockwise fully.
If wingnut is too tight, use pliers to loosen.
leveling
To adjust further, use a level on the
treadmill belt and tighten or loosen
the nut on the bottom of the foot
with a 19mm wrench, or adjustable
wrench, to align your treadmill on
both sides.
Once the treadmill is properly
leveled on both sides, tighten the
wing nut back down until snug.
DO NOT OVERTIGHTEN
To Next Page
Loading...
