Page 5
PA2040
Features
• Four zone speaker outputs oering 200 Watts
• Two Combo input jacks for microphones
• A single ¼” phone jack for line inputs
• Bluetooth audio streaming from Bluetooth devices
• FM radio built-in
• Onboard stereo USB recording function with MP3
and WAV playback
• Echo Eect with adjustable Speed and Repeat
• Bass and treble EQ available on main mix
• Six segment front panel VU meter
• Two ¼” phone jacks for low-impedance output and
four barrier strips for 100V zone output
• Independent Zone buttons
• Stereo RCA tape in and record output, record out
with ¼” phone jack output
Getting Started
1. Before turning the power on, the master volume
control should be set to -∞.
2. Always turn the power o before connecting or
disconnecting cables.
3. Check the AC outlet to ensure it is of a suitable
voltage before connecting the AC plug of this
device.
4. Do not obstruct the back panel due to the heatsink
and air vents needing ventilation.
5. Please ensure the distance between the back of
the PA2040 and the wall is over 1.5 feet to ensure
the device gets the ventilation which it needs.
RMS200W
3
)COMBO(
¼" XLR
MP3/WAV USB
4
1004
ZONE1+ZONE2+ZONE3+ZONE4
RCA
MAIN OUT ¼"
D
Bluetooth
FM
1
MASTER
2
3
220
4
5
30
To Next Page
Loading...