AIO-L Module (cont.)
Line Level / Headphone Outputs
Two amplified outputs with Euroblock connectors are provided for connecting
headphones or line level devices. The outputs are differential with (+), (-), and ground
connections. For headphones or other low power speakers the ground connection may
be ignored. Both the (+) and (-) outputs are biased at ground.
Note: Driving loads smaller than 32Ω will cause the amplifier to clip and/or oscillate at
higher output levels.
Output Power (THDN <.1%): 32mW continuous at 1kHz
Maximum Output Voltage: ± 2.65V
Frequency Response: ± 0.5dB 20Hz – 20kHz
To Next Page
Loading...