CS-4010 OPERATION
X7503380000 33
7/22 ECHO Incorporated
◆ After starting engine, immediately squeeze and then
release throttle trigger to release fast idle throttle latch,
otherwise severe brake damage may occur.
◆ Never use fast idle throttle latch for cutting.
◆ Use fast idle throttle latch only in starting.
Note: Do not increase engine speed while chain brake is locked.
Severe brake damage will result.
Starting Warm Engine
Make sure bar and chain are free from any obstruction when
starting the chain saw.
1. Move chain brake lever fully
FORWARD to LOCK chain brake
before starting.
2. Confirm there is fuel and chain
oil in tanks.
3. Securely hold chainsaw as
shown and pull starter handle.
4. Choke (A) may be used if
necessary, but after first starting
sound, squeeze throttle trigger to
release choke to OPEN and
return engine to idle.
Note: If engine does not start
after 5 pulls, use cold start
procedure.
To Next Page
Loading...
