OPERATION CS-4910
30 X7503314200
(&+2,QFRUSRUDWHG
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.
Starting Cold Engine
Make sure the bar and chain are free from any obstruction when
starting the chain saw.
0RYHFKDLQEUDNHOHYHU$IXOO\
)25:$5'WR/2&.FKDLQEUDNH
EHIRUHVWDUWLQJ
)LOOWKHIXHOWDQNZLWKIXHOPL[WXUH
'RQRWRYHUILOO
)LOOWKHFKDLQRLOWDQNZLWK
OXEULFDQW'RQRWRYHUILOO
0RYH6723VZLWFK%WR83
SRVLWLRQ
3XOOFKRNHFRQWURONQRE&DOO
WKHZD\RXW&/26(' FKRNH
SRVLWLRQ
3UHVVWKHGHFRPSUHVVLRQGHYLFH
'
◆ After choke control knob is pulled and then knob is
returned to original position, throttle remains slightly open
(fast idle latch condition).
◆ The chain will attempt to move when engine is started with
fast idle throttle latch engaged.
◆ Do not start engine before chain brake is locked.
A
B
C
D
To Next Page
Loading...
Need help?
General