15
DPB-2500
99922205730
© 08/2021 ECHO Incorporated
DESCRIPTION
Installing the Blower Tube
1. Move the tube until the tube release
button (4) engages into the slot.
Installing the Battery
1. Align ridges on the sides of the
battery (7) with the grooves in the
battery compartment (8).
2. Push the battery (7) into the battery
compartment (8) until the battery (7)
locks into place.
3. When you hear a click, the battery
(7) is installed.
7
8
4
• If the battery or charger is damaged, replace the battery or the charger.
• Stop the machine and wait until the motor stops before you install or
remove the battery.
• Read and understand the instructions in the battery and charger manual.
Remove the Battery
1. Push and hold the battery release button.
2. Remove the battery from the machine.
To Next Page
Loading...
