Echo DPB-2500 - Operation of the DPB-2500 Blower; Starting and Stopping the Unit

DPB-2500
9992220573016
© 08/2021 ECHO Incorporated
DESCRIPTION
Starting the Unit
1. Pull the trigger switch (1) to start the
machine.
2. Pull the trigger switch fully to
increase the speed.
3. Release the trigger switch to
decrease the speed
1
Operation
6
You can use the nozzle to increase airow in tight areas.
5
2. Connect the concentrator nozzle (6)
to the tube (5) until the the tube locks
into the concentrator nozzle (6)
Make sure the blower tube is in position before operation.
Stopping the Unit
1. Release the trigger switch to stop the machine. Wait until the motor stops
after you stop the machine.