15
Before you start
3. Align locking ribs (J) on vacuum elbow with recesses (B) in
locking ring, and slide vacuum elbow into locking ring.
4. After pushing vacuum elbow all the way in fan case so that
line (K) will meet locking ring, rotate locking ring clockwise
1/8 turn to lock vacuum elbow in place.
5. Place debris bag opening over flared end of vacuum elbow,
and cinch debris bag securely at the position (L) with Velcro
strap.
Install blower pipes for blower usage
1. Stand unit upright on blower base.
2. Release locking ring with a coin or screwdriver, and rotate so
that lock symbol (A) is at top of ring.
1. Vacuum elbow
1. Locking ring
1. Debris bag
To Next Page
Loading...
