Hedge Clipper
O
peratOr's Manual
9
assembly
This model is factory assembled.
NOTE
For normal cutting, Echo strongly recommends the blade guard
be installed. In extreme conditions, such as commercial cutting,
or when cutting thick and/or dense branches, efciency may be
increased by trimming without the blade guard.
Parts Required: Blade Guard, Blade Lock Nuts (P/N 43302206460),
Washers
WARNING
Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.
IMPORTANT
Follow blade bolt adjustment instructions exactly. Failure to do so
could result in damage to blades or gearbox.
1 - Hedge Clipper Assembly
1 - Operator’s Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Echo Power Blend X
TM
2-stroke oil sample
1 - Blade Cover
ConTenTs
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.