Echo HC-1600 User Manual

9
NOTE
• Use short pulls, 1/2 to 2/3 rope length, when
pulling starting rope.
• Do not allow the starter handle to snap back
against the housing.
• Always hold the unit firmly and make sure the
cutting blades are free of obstructions before
starting.
Ignition switch
START
Throttle trigger
SAFE STARTING TECHNIQUES
1. Turn the ignition switch to the START position.
2. Move choke control lever up to CLOSED position.
3. Push purge bulb 3 to 4 times or until fuel is visible in
clear fuel return line.
4. Pull starter handle until first firing sound.
5. Move choke control lever down to OPEN position.
6. Restart engine and allow it to warm up.
STARTING COLD ENGINE
7. Depress throttle trigger lockout and gradually
squeeze throttle trigger.
WARNING DANGER
CUTTER BLADES WILL START MOVING AS
ENGINE ATTAINS CLUTCH ENGAGEMENT
SPEED.
HC-1500
HC-1600
Ignition switch
START
Purge bulb
CLOSE
Choke lever
OPEN
Throttole trigger
lockout
Throttole trigger
lockout
Starter handle
WARNING DANGER
WHEN ENGINE IS STARTED, CONFIRM IF THERE
IS NOT ANY ABNORMAL VIBRATION OR SOUND.
IF THERE IS ABNORMAL VIBRATION OR SOUND,
ASK YOUR DEALER TO REPAIR.

Echo HC-1600 Specifications

General

Brand	Echo
Model	HC-1600
Category	Trimmer
Language	English