Echogear EGMF2 - Step 2 A Install the Wall Plate (For Wood Stud); Find a Stud; Align the Template

10
REMEMBER THE LAST TIME
YOU “WINGED IT”?
"Come on ...
level with me"
Use a stud
finder ...
... and/or verify
the edges with
an awl or a
small drill bit.
X-Ray
Specs
sold
separately
"favorite
pokey
device"
(For Wood Stud)STEP 2A Install the Wall Plate
Align the Template
STEP 2A.2
Find a Stud
STEP 2A.1
05