EasyManua.ls Logo

echtermann Sensor 2314.20 - Page 5

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 74.107.EU15 74.107.EU15 5
electronic functions - washbasin faucet with touch-function
signs and symbols
- touch function - hand/object within sensor area
 - water fl ows - LED fl ashes GREEN
 - waterfl ow stops - LED fl ashes RED
h - hours / min. - minutes / sec. - seconds
function procedure
feedback
signal
information default
setting
range
via iqua-
Touch
rst startup
after installation
-. -
1x
app. 1 sec. till 
after releasing
+  2x/sec., keep out of sensor area
wait till
1x
confi rmation, ready for operation
temporary off
«cleaning mode»
activate
1x
app. 2 sec. till 1x
extended function mode is active
2 min. -
2x
a app. 0,5 sec. pulsing during active function
temporary off
stop
1x
app. 0,5 sec. 1x
manual stop
or automatic
1x
automatic after preset time
continous run
activate
1x
app. 2 sec. till 1x
extended function mode is active
2 min.
0,5-20 min.
(in 0,5 min.
steps)
1x
minimum 3 sec.
(max. 5 sec.)

water fl ows after releasing
continous run
stop
1x
app. 0,5 sec. 
manual stop
or automatic

automatic after preset time
follow up
time control
for normal operation
set / programm
1x
app. 2 sec. till 1x
extended function mode is active
1 sec.
0-10
sec.
1x
app. 5 sec. till 1x
1x
0 - 10 sec.
keep touched
+ 
1x/sec., water fl ows during touching -
releasing defi nes duration
after releasing
1x
confi rmation, ready for operation
time of waterfl ow
for continous on
and
purge duration for
line purge feature
set / programm
1x
app. 2 sec. till 1x
extended function mode is active
2 min.
0,5-20
min.
(in 0,5 min.
steps)
1x
minimum 3 sec.
(max. 5 sec.)
 +
touch max. 5 sec., water fl ows after releasing,
number of
(1x-40x) shows current setting
1x
keep touched till 1x - 40x
1x
=0,5 min. .... 40x = 20,0 min.
releasing defi nes duration
after releasing
+ 1x
check / confi rmation of setting by repeating
number of
(1x - 40x) according to setting
line purge feature
activate / deactivate
«automatic fl ush on
set intervall»
1x
app. 2 sec. till 1x
extended function mode is active
off
off
12 h
24 h
48 h
1x
app. 25 sec. till 1x - 4x
1x= off, 2x=12h, 3x= 24h, 4x= 48h,
ignore fl ashes after 5 sec. and 10 sec. - keep
touched till
1x - 4x aftter app. 25 sec.,
releasing defi nes interval
wait till
1x
confi rmation, ready for operation
restart electronics
1x
app. 2 sec. till 1x
extended function mode is active
- -
2x
a app. 0,5 sec. pulsing during active function
1x
app. 5 sec. till 4x 1x/sec.
release and wait till
+  1x/sec., keep out of sensor area
wait till
1x
confi rmation, ready for operation
sensor range
set / programm
1x
app. 2 sec. till 1x
extended function mode is active
6 1-8 steps
2x
a app. 0,5 sec. pulsing
1x
app. 15 sec. till 1x - 8x
1x = min. ...... 8x = max.
ignore fl ashes
4x after 5 sec., keep touched
till
1x - 8x after app. 15 sec., releasing
defi nes sensor range step
release and wait till
+  1x/sec., keep out of sensor area
wait till
1x
confi rmation, ready for operation
security off
permanent 
when without movement only
- -
empty battery
2x/sec. during dedecting hand / object
- -
touch
touch
XXX
XXX
XXX
XXX