Need help?Do you have a question about the ECI Hi-FOCuS 960E and is the answer not in the manual?
Detailed description of the ECI 960E platform and its capabilities.
Overview of the 960E's front panel, chassis, and connection interfaces.
Provides an overview of the tasks required for installing the 960E.
Considerations for assessing the installation site, including environment and physical location.
Required tools, checklist of items, and site preparation requirements.
Procedure for safely unpacking and visually inspecting the equipment for damage.
Instructions for removing the door, mounting the shelf, and rack installation.
Step-by-step guide for installing Line/NI, GPLT, and CFU cards.
Procedures for installing the Central Filtering Unit and the front cover.
Connecting grounding, power, clock reference, and alarm cables.
Connecting SFP, Fiber Optic, and Subscriber Copper cables.
Connecting Ethernet cables for out-of-band management.
Review of cable distribution, connectors, sockets, and power supply.
Procedures for checking board status and fan operation after power-on.
Steps to power up the 960E and procedure for powering down the system.
Establishing terminal connection and setting basic parameters like IP address.
Checking shelf card population and SW/HW versions.
Procedure for replacing the fan unit, including tools and steps.
Instructions for installing and removing the dust filter.
Procedures for removing and installing SFP transceivers.
Details on clock reference and alarm connector pin assignments.
Information on data, telecom, Ethernet, E1, and fiber optic connections.
Details on power range and the D-type 5W5 connector pin list.
States and definitions for the Power and Alarm LEDs on the CFU card.
Definitions of terms and acronyms used in the manual.
Details on dimensions, weight, environment, safety, EMC, and rack installation.
Power consumption details for selected cards and the shelf assembly.
General| Model | Hi-FOCuS 960E |
|---|---|
| Power Supply | Dual redundant power supplies |
| Form Factor | Rack-mounted |
| Cooling | Fan-based cooling |
| Management | CLI, Web-based, SNMP |
| Type | MSAP (Multi-Service Access Platform) |
| Interfaces | DSL, Ethernet, Fiber |
| Humidity | 5% to 95% (non-condensing) |
To Next Page