To Next PageTo Next Page
Need help?Do you have a question about the Eckman Elite EKETC01 and is the answer not in the manual?
Keep work area clean and well lit. Avoid explosive atmospheres. Keep children away.
Match plugs to outlets, avoid contact with earthed surfaces, do not expose to rain, protect cords.
Stay alert, use common sense, wear eye protection, use protective equipment.
Ensure switch is off before connecting power or picking up the tool. Remove adjusting key or wrench before starting.
Maintain proper footing and balance for control. Avoid loose clothing or jewelry that can catch moving parts.
Use the correct tool for the application. Ensure tools are maintained and cutting edges are sharp.
Information on servicing the tool, and specific safety warnings for pole hedge trimmer and branch lopper use.
Recommendations for work area safety and electrical safety, including RCD use and cable inspection.
Instructions on when to disconnect the power supply, such as before maintenance or clearing blockages.
Warning about the risk of injury from blades. Always fit the protective cover when finishing or interrupting work.
Ensure all nuts, bolts, and screws are secure for safe operation. Store disconnected and out of reach of children.
Carefully unpack, inspect for damage, and verify all parts are supplied before starting assembly.
Do not operate if parts are damaged or missing. Avoid unauthorized modifications to prevent hazardous conditions.
Warning about sharp saw chain edges and the need for protective gloves during installation and handling.
Steps for correctly positioning the saw chain around the sprocket and guide bar for proper function.
Warning to remain alert and avoid carelessness during operation to prevent serious injury.
Mandatory use of safety goggles, glasses with side shields, and head protection during operation.
Warning against using unrecommended attachments or accessories to prevent serious personal injury.
Caution to avoid placing hands between the pivoting head and threaded base to prevent pinch injuries.
Always use both hands, keep the mains lead behind the tool, and clear the work area of hazards.
Advice on what to do if blades jam and techniques for trimming hedges effectively.
Disconnect power before maintenance. Regularly check the machine for wear or damage before use.
Instructions for cleaning, lubricating, and maintaining cutting blades, and replacing damaged blades.
Keep ventilation slots clean, clean motor housing with a moist cloth, and store with a protective cover.
General| Brand | Eckman Elite |
|---|---|
| Model | EKETC01 |
| Category | Trimmer |
| Language | English |
