Eckman Elite EKETC01 - Technical Data; Intended Use

3
I. Technical Data：
Model
PHCEG02A-450/ PHCEG02A (EKETC01)
Voltage/Frequency
230V-240V～/50Hz
Input Power
450W/710W
No load speed (Hedge
trimmer /Branch Lopper)
1800/min ./6500/min
Noise emission value LWA
(Hedge trimmer /Branch
Lopper)
measured 95dB(A) / 99 dB(A)
Hand / arm vibration a vhw
(Hedge trimmer /Branch
Lopper)
< 2.52 m /s2 /< 2.24 m /s2
Overall Length (Hedge
trimmer /Branch Lopper)
3.0m /2.9m
Length of cutter blade
(Hedge trimmer /Branch
Lopper)
450mm/250MM
Set Net Weight(without
power cord)
6.50Kgs
Branch Lopper Chain and
Bar
10 inch Oregon Chain and Oregon Bar
Maximum Diameter Cut of
The reciprocating Hedge
Trimmer blade
16mm/1/2”
Weight of hedge trimmer
with handle / weight of
branch lopper with handle
4.1KGS/4.4KGS
Minimum reach of hedge
trimmer / minimum reach of
lopper
2.15M/2.05M
Blade Adjustment Degrees
(Hedge trimmer /Branch
Lopper)
+60° to -80°/+15° to -15°
II. Intended Use
This Mains Hedge Trimmer And Branch Lopper set is intended for the cutting of
hedges, shrubs, branches and grass coverings in private domestic gardens and
allotments. If used for purposes other than those intended, this will invalidate your
guarantee.