Ecler MAC70i - Technical Characteristics

36
6. MAC70i TECHNICAL CHARACTERISTICS
Input Sensitivity nom(*)/Impedance PHONO -40dBV/47k
LINE -10(0)dBV*/47k
CD 0(-10)dBV*/47k
AUX -10(0)dBV*/47k
MIC (BAL) -50dBV/2.2k
MIC ATT (BAL) -30dBV/2.2k
MIX -10dBV/9.3k
Outputs Level/Minimum load OUT1 (BAL) 0(-10/+4/+6)dBV*/600
1(0.3/1.6/2)V
OUT2 0(-10/+4/+6)dBV*/2.2k
1(0.3/1.6/2)V
REC1 -10dBV/10k
REC2 -10dBV/10k
CUE -10dBV/10k
HEADPHONES 230mW/400
(*) internally switchable
input sensitivity adjust GAIN ±20dB
Frequency response PHONO RIAA±0.5dB
LINE/CD/MIX 15Hz-45kHz+0/-1dB
MICRO 20Hz-25kHz+0/-1dB
Harmonic distortion PHONO <0.03%
LINE/CD/MIX <0.02%
MICRO <0.2%
CMRR MICRO >70dB@1 kHz
Signal to noise ratio PHONO >80dB
LINE/CD >85dB
MICRO >75dB
MIX >85dB
Tone control BASS 100Hz ±12dB
MID 1.8kHz±15dB
TREBLE 10kHz ±12dB
Mains Depending on country See characteristics plate in the unit
Power consumption 24VA
Dimensions Panel 482.6 x 310.5mm Height 109mm
Weight 5.5kg