Need help?Do you have a question about the Ecler WARM2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| EQ | 3-band EQ per channel |
| Type | DJ Mixer |
| Crossfader | Yes |
| Inputs | 2 x Phono/Line RCA, 1 x Microphone XLR/Jack |
Key safety and operational remarks for the WARM2 mixer.
Essential safety guidelines to follow when using the WARM2 mixer.
A note regarding the importance of reading the manual.
Background on Ecler's history and the development of the WARM2 mixer.
Overview of the WARM2 mixer, its features, and design.
Highlights of the WARM2 mixer's main features and capabilities.
Detailed diagram illustrating the WARM2 mixer's controls and connections.
Schematic representation of the WARM2 mixer's internal circuitry.
Guidance on connecting various audio sources to the WARM2 mixer.
Details on connecting turntables, line sources, and microphones.
Instructions for connecting the WARM2 mixer's outputs to other equipment.
Specifics on main, booth, FX, and headphone outputs, levels, and connections.
Recommended sequence for powering on and off the WARM2 mixer.
Explanation of each control and function on the WARM2 mixer.
Selecting inputs and adjusting channel sensitivity with TRIM.
Using the EQ and Isolator controls for sound shaping.
Guide to using the PFL and headphone monitoring features.
Connecting and using external effects units with the WARM2 mixer.
Details on potentiometers and controlling HOUSE/BOOTH output levels.
Tips for avoiding ground loops and managing background noise.
Best practices for audio cabling and cleaning the mixer.
To Next Page
