Ecler VERSO P Series User Manual

5
4. MODELS AND CHARACTERISTICS
The VERSO P series is formed by thee models, all two-way and self-powered separately:
VERSO 8P (200W RMS):
• Low-medium frequency: 8” bass speaker (woofer).
• High frequency: 34mm motor.
VERSO 10P (300W RMS):
• Low-medium frequency: 10” bass speaker (woofer).
• High frequency: 34 mm motor.
VERSO 12P (450W RMS):
• Low-medium frequency: 12” bass speaker (woofer).
• High frequency: 44 mm motor.
Characteristics common to all three models:
• Two MICRO/LINE inputs with selectable sensitivity level.
• Two way mixer.
• 3-band tone control at mixer output.
• Balanced "STACK OUT" output that enables the VERSO P to be connected to other
self-amplifying units or conventional amplifiers.
• Active selectivity filter and slope of 24dB/oct for separating the two ways.
• Efficient protection system for reducing signal clipping, thereby protecting the speakers
against occasional saturation. A red LED indicator marked “CLIP” warns the user when
this is happening.

Ecler VERSO P Series Specifications

General

Brand	Ecler
Model	VERSO P Series
Category	Speakers
Language	English