How to fix Ecleris Power Supply when it will not turn on?
If your Ecleris Power Supply is not turning on, here are a few things to check: * Ensure the power cable is properly connected to the electric power supply. * Inspect the power cable for any damage and replace it if necessary. * Check the plug for any signs of damage and replace it if needed. * Examine the fuse to see if it is damaged or burnt, and replace it if it is.
Why is the Ecleris Power Supply image too dark?
If the image from your Ecleris Power Supply is too dark, it could be due to several reasons: * There might not be enough light. Increase the levels of intensity of illumination of the light source. * The external optical system might be dirty, so verify that it is clean. * The video monitor may not be configured with adequate levels of brightness. Verify its settings. * You may need to increase the level of brightness. Try pressing the corresponding button.
How to resolve a blurred image on Ecleris PROCAM HD Power Supply?
To resolve a blurred image on your Ecleris Power Supply, consider the following: * Perform the focus adjustment of the optical system. * Check if the videocamera has the adapter ring. * If you don’t use flexible scope, deactivate FIBERSCOPE function by pressing FIBERCOSPE button.
What causes an Ecleris Power Supply image to be too bright?
If the image from your Ecleris Power Supply is too bright, it could be due to: * A misadjusted monitor. Calibrate properly the image levels of the monitor. * A misadjusted function. Select the adequate specialty by pressing the button.
What causes the Ecleris PROCAM HD Power Supply image to lack real colors?
If the image from your Ecleris Power Supply lacks real colors, it is likely due to an incorrect white balance. Adjust the white balance to correct this issue.
How to fix Ecleris Medical Equipment that will not turn on?
If your Ecleris Medical Equipment isn't turning on, here's what to check: * Ensure the equipment is properly connected to the electric power supply. * Inspect the power cable for any damage; replace it if needed. * Examine the plug for any signs of damage and replace if necessary. * Check the fuse and replace it if it's damaged or burnt out.
What to do if the green light is on but there is no image on the Ecleris Medical Equipment screen?
If the green light is on but there is no image on the screen of your Ecleris Medical Equipment, consider the following steps: 1. Check the cable connections to ensure they are fully plugged in. 2. Try turning the monitor and the PROCAM HD console off and on again (wait 10 seconds before turning them back on). Also, try changing the video output at the PROCAM HD console and the connection to another input. 3. Make sure the monitor is turned on. 4. Ensure the monitor is connected to the PROCAM HD console with the provided cord. 5. Verify the monitor is set to the correct video input mode (HDMI / DVI / VGA / CVBS). 6. Confirm the camera is connected to the front panel of the console.
Why is the image too dark on my Ecleris Medical Equipment?
If the image on your Ecleris Medical Equipment is too dark: * Increase the light source's intensity. * Ensure the external optical system is clean. * Check that the video monitor's brightness levels are adequate. * Try increasing the brightness level by pressing the appropriate button.
What causes a blurred image on Ecleris Medical Equipment and how to fix it?
A blurred image on your Ecleris Medical Equipment can be due to: * Lack of focus adjustment of the external optical system. Perform the focus adjustment of the optical system. * Check if the videocamera has the adapter ring. * If you don’t use flexible scope, deactivate FIBERSCOPE function by pressing the FIBERCOSPE button.
What causes an image to be too bright on Ecleris Medical Equipment?
If the image on your Ecleris Medical Equipment is too bright: * Calibrate the image levels of the monitor properly. * Select the appropriate specialty by pressing the corresponding button.
General| Brand | Ecleris |
|---|---|
| Model | PROCAM HD |
| Category | Power Supply |
| Language | English |
To Next Page
