User Controls
This section describes the control buttons and function for your ECLIPSE Oxygen System.
FRONT PANEL ICONS
ON/OFF Button and Indicator:
This button turns the system ON or
OFF. The Green Indicator is lit when the unit is ON.
Increase or Decrease Flow Rate Button: Use these buttons to set the
flow rate to your prescribed level.
Flow Mode Button and Indicator: The ECLIPSE contains a button to
toggle between Continuous Flow and Pulse Flow mode. Pulse Flow
mode allows a significant increase in the amount of time the system
can operate from the Power Cartridge. When the Pulse Flow Mode is
activated, the green Flow Mode indicator goes on and a pulse of
oxygen is delivered upon inhalation. When the pulse of oxygen is
delivered, the indicator briefly goes off. Only change your flow settings
at the recommendation of your physician.
SYSTEM STATUS INDICATORS
The ECLIPSE control panel displays important operating information. This section will
help you understand these features.
Green, Yellow, and Red indicators on the front panel indicate the operating condition
of the system. For more information on the indicators, see the Alarm Conditions and
Troubleshooting table.
ON
/OFF (Green) Indicator - System OK:
Indicates that the EC
LIPSE is ON and operating properly.
ALE
RT (Y
ellow) Indicator - Low and Medium Priority Alerts:
When steadily illuminated, this indicates a low priority awareness
condition or Caution. Continue to use your system and refer to the
Model 1000 User Manual
ECLIPSE
TM
Model 1000 User Manual
|
13
To Next Page
Loading...