Need help?Do you have a question about the Eclipse 705 and is the answer not in the manual?
General| Brand | Eclipse |
|---|---|
| Model | 705 |
| Category | Transmitter |
| Language | English |
Information that augments or clarifies an operating step.
Alerts to special conditions that could injure personnel or damage equipment.
Identifies potentially dangerous situations or serious hazards.
General safety precautions for electrical and computer equipment.
Preparation for QuickStart Installation, including equipment and tools.
Key steps for mounting the Eclipse transmitter and probe.
Procedures for wiring the Eclipse transmitter.
Steps for configuring the Eclipse transmitter using the keypad.
Instructions for unpacking the instrument and checking contents.
Steps to reduce risk of component failure due to static discharge.
Site preparation, equipment, and tool requirements before installation.
Procedures for mounting the Eclipse transmitter to a tank.
Instructions for installing coaxial probes (Models 7xA, 7xD, etc.).
Procedures for installing twin rod probes (Models 7xB, 7x5, 7x7).
Instructions for installing single rod probes (Models 7x1, 7x2, 7xF, 7xJ).
Guidelines for mounting and installing bulk solids probes.
Procedures for mounting the transmitter (Integral or Remote).
Detailed wiring instructions for different applications (GP, IS, XP).
Steps for setting up and configuring the transmitter via menu.
How to connect a HART communicator to the transmitter.
Description of the communicator's display and menu structure.
Overview of the Fieldbus communication system.
Advantages of using Fieldbus in installations.
Explanation of device configuration and Device Descriptions.
Overview of the Guided Wave Radar Level Transmitter.
Explanation of the working principles of the device.
Details on MIR technology.
How the device measures interface levels.
Common issues and their solutions.
Explanation of system status messages.
Problems related to specific application conditions.
Troubleshooting for level applications.
Troubleshooting for interface applications.
FM, CSA, ATEX specifications for Explosion Proof installations.
FM, CSA, ATEX specifications for Intrinsically Safe installations.
List of parts available for replacement.
List of recommended spare parts for inventory.
Functional specifications of the transmitter.
Chart for selecting appropriate O-ring materials.
Performance specifications for Model 705.
Performance specifications for interface applications.
Operating limits for various process conditions.
Specifications for different probe types.
Physical dimensions and characteristics.
Dimensions of coaxial probes.
Dimensions of twin rod probes.
Describes the transmitter model number structure.
Describes the probe model number structure.
Lists available process connection types.
Details of threaded connection types.
Details of ANSI flange types.
Details of specialty flange types.
Details of DIN flange types.
Length specifications for rigid probes.
To Next Page