Need help?Do you have a question about the Eclipse ACC-900 and is the answer not in the manual?
Details the two methods for entering the device's programming mode.
Outlines the procedures to safely exit the programming mode.
Step-by-step instructions for modifying the master code.
Configures the duration the door relay remains active after activation.
Process for enrolling a single card or key tag.
Method for adding multiple cards or key tags sequentially.
Instructions for creating user-specific access codes.
Removes a specific card, tag, or user code from the system.
Deletes multiple cards, tags, or user codes by specifying a range.
Resets the system by removing all stored credentials.
Activates a single card or tag for system access.
Activates multiple cards or tags for system access.
Configures the anti-pass-back security feature for access control.
Overview of default function values and methods for calculating controller settings.
Details the color coding for the P1 connector and its applications.
Details the color coding for the P2 (Wiegand Read Head) connector.
Details the color coding for the P3 (Tamper Switch) connector.
Details the color coding for the P4 (Networking Module) connector.
Wiring diagram for installing a magnetic lock.
Wiring diagram for installing an electric bolt lock.
Wiring diagram for installing an electric door strike.
Wiring diagram for connecting magnetic door contacts and alarm system.
Diagram illustrating the setup for network connectivity.
General| Transactions | 100, 000 |
|---|---|
| Power supply | 12VDC |
| Door control | 2 doors |
| Reader ports | 4 |
| Outputs | 4 |
| Communication | TCP/IP, RS-485 |
To Next Page