Eclipse GEO User Manual

ALARM
THE ALARM TIME PARAMETER
An alarm condition is generated whenever the Game
Timer counts down to a specific time set by the ALARM
parameter. This parameter can be set between 00:00
and 10:00 minutes in 10 second increments.
When the alarm condition is generated the Game Timer
will start to flash and the audible alarm will sound
every second, provided that the SOUND parameter is
set to ‘ON’.
START
THE TIMER START PARAMETER
This parameter is used to select the event which will
cause the Game Timer to begin counting down. This
parameter has the following choices:
> BUTTON: Pressing the button will start the game
timer.
> TRIGGER: Pulling the trigger will start the game
timer.
> CANCEL: Cancel editing and leave the parameter
unchanged.
TIMER
THE GAME TIMER MENU
This menu is comprised of parameters that control the
operation of the Game Timer:
GAME
THE GAME TIME PARAMETER
This parameter is used to set the game time; the time
from which the Game Timer counts down to zero. This
parameter can be set between 00:00 and 60:00 minutes
in 10 second increments and the factory default is
07:10 (7 minutes 10 seconds).
When the game timer reaches 00:00, GAME OVER
will be displayed and the audible alarm will sound
continually, that the SOUND parameter is set to ‘ON’.
ADVANCED SET-UP
34.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR GEO
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
35.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE

Eclipse GEO Specifications

General

Manufacturer	Planet Eclipse
Power Source	9V Battery
Caliber	.68
Firing Modes	Semi-Auto, Ramping, Full Auto
Rate of Fire	20+ BPS
Height	200mm
Air Source	High Pressure Air (HPA)