Eclipse GEO User Manual

Names the component parts of the Geo Marker.

Details the components and threading of the Eclipse Shaft 3 barrel.

Explains the Inline Regulator components and includes a warning.

Illustrates the components of the Geo Bolt System.

Shows the components of the Solenoid Assembly.

Provides a brief overview of the Geo firing sequence.

Explains the function and buttons of the Navigation Console.

Details the steps for installing a 9-volt battery.

Explains how to power on and off the Geo marker.

Describes the function and use of the Break Beam Sensor System.

Covers initial setup procedures before using the Geo.

Guides on installing air systems and attaching a loader.

Guides on adjusting the trigger settings.

Explains how to adjust velocity and firing chamber volume.

Describes the Geo's user interface and run screen layout.

Explains various indicators and display elements on the Geo.

Before you can begin to use your Geo, you will need to attach an air-system and a paintball loader.

Guides on installing air systems and attaching a loader.

Guides on adjusting the trigger settings and detection methods.

Explains how to adjust velocity and firing chamber volume.

Describes the Geo's user interface and run screen layout.

Explains various indicators and display elements on the Geo.

Overview of the main menu structure and its parameters.

Details the parameters available in the set-up menu.

Explains how to access the main and set-up menus.

Guides on navigating menus and changing parameter values.

Details parameters within the main menu like Display, Timer, Game, etc.

Details parameters within the set-up menu like Lock, Preset, Mode, etc.

Explains parameters for adjusting ramping modes.

Explains parameters related to timing specific events.

Explains parameters for tuning software filters.

Guides on optimizing trigger filters for performance.

Explains how to enable and use training mode.

Explains hardware control parameters like Trigger, Sound, and Tones.

Step-by-step guide to cleaning the Break Beam Sensor System.

Detailed instructions for cleaning the inline regulator.

Guides on disassembling and cleaning the bolt assembly.

Step-by-step instructions for removing the grip frame.

Guides on cleaning and maintaining the solenoid assembly.

Instructions for disassembling and cleaning the trigger assembly.

Guides on cleaning and maintaining the OOPS.

Lists common symptoms, their possible causes, and solutions.

Addresses issues like chopping paint, not firing, and low velocity.

Lists certified service centers in the UK and Europe.

Lists certified service centers in the USA and Canada.

Lists certified service centers globally.

An indexed list of all part names with corresponding numbers.

Details the location and size of various O-rings.

Lists screw types, quantities, and their descriptions.

Describes the Tech Flex Mat for Geo protection.

Recommended grease for maintenance and servicing.

Recommended oil for maintenance and servicing.

Refers to replacement spares for the Geo.

Describes a tech shirt for carrying tools.