DBOUNCE
THE DEBOUNCE PARAMETER
The DBOUNCE parameter is used to combat any trigger
bounce that might occur in the Geo and can be set
between level 1 and level 9 in one level increments.
> LEVEL 9:
Level 9 providing the most filtering.
> LEVEL1:
Level 1 providing the least filtering.
> CANCEL:
Cancel editing and leave the parameter
unchanged.
EMPTY
THE EMPTY BREECH TIME PARAMETER
In order for the BBSS to function correctly it must first
detect that the bolt is fully retracted and the breech is
empty, and then detect that a paintball is loaded into
the breech before the Geo is allowed to fire.
Slots or holes in some third party bolts can fool
the BBSS and so this parameter is used to specify a
minimum time that the breech must be empty. The
parameter can be set between 1.0 and 10.0ms in 0.5ms
increments.
FILTER
THE FILTER MENU
The parameters on the Filter Menu are all used to tune
the Geo’s software filters which prevent the Geo from
firing unless all of the necessary conditions are met. The
factory default settings will be suitable for most set-ups,
however certain loader and trigger set-ups may require
modification of one or more of these parameters:
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR GEO
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
To Next Page
Loading...
Need help?
General
