To Next PageTo Next Page
Need help?Do you have a question about the Eco Pure EP 6245 and is the answer not in the manual?
Covers one-year full warranty and ten-year limited warranties for specific parts.
Outlines exclusions and conditions not covered by the warranty.
Important safety precautions and guidelines for operating the water softener.
Guidance on selecting an optimal location for the water softener unit.
Lists necessary tools, pipes, and fittings for the installation process.
Advice on planning the plumbing connections for the softener installation.
Install bypass valve, adaptors, and brine tank overflow fittings.
Position the softener and connect inlet/outlet pipes.
Steps for installing the grounding clamp for electrical continuity.
Instructions for connecting the valve drain hose to a suitable drain point.
Details on adapting a rigid copper tube for the valve drain.
Connect overflow hose and brine tubing for two-tank models.
Flush pipes, expel air, and test for water leaks after installation.
Instructions for adding water and the correct type of salt to the brine tank.
Connect to power and program the electronic demand timer.
Notes on when timer settings are necessary, such as after installation or power outage.
Step-by-step guide to setting the current time on the electronic timer.
Instructions on how to set the water hardness level on the timer.
Guide to setting the desired time for the automatic regeneration cycle.
Ensure all prior installation steps are finished before sanitizing.
Add the specified amount of household bleach into the brinewell.
Initiate a recharge cycle to draw bleach through the softener.
Flush the system with 50 gallons of water after sanitization.
Explains water origins, impurities, and common conditions like Hardness, Iron, Acidity, Sediment.
Explains the ion exchange process during soft water service.
Describes cleaning resin beads to restore softening capacity.
Explains how hard water is available during regeneration cycles.
Guidance on monitoring salt levels and adding salt to the brine tank.
Steps to identify and break a salt bridge in the brine tank.
Instructions for cleaning the softener's resin bed to remove iron buildup.
Detailed steps for cleaning the nozzle and venturi for proper brine suction.
Troubleshooting guide for common issues causing lack of soft water.
Explains reasons for intermittent hardness and potential solutions.
Description of the standard display readings during normal operation.
How to manually initiate or schedule a regeneration cycle, including Recharge Now/Tonight.
Information on how timer settings are retained during power interruptions.
Explanation of the salt efficiency setting and its impact.
Specific setting requirement for California regarding high efficiency.
Self-diagnostic function of the timer and error code explanations.
Troubleshooting guide for common issues causing lack of soft water.
Steps to enter and use the manual diagnostic mode for the timer.
Checks the operation of the valve motor and regeneration cycles.
Diagram illustrating the electrical connections of the softener components.
General| Brand | Eco Pure |
|---|---|
| Model | EP 6245 |
| Category | Water Dispenser |
| Language | English |
