• The connection of the power cable is loose.
• Screw or other spare parts inadvertently falls into the inverter.
• Improper operations by untrained non-professional or technical personnel.
9. Safety Cautions for Stopping the Inverter
• The internal conductive modules could be touched after the inverter stopped
running for five minutes.
• The inverter is allowed to restart after removing the faults, which affects the
safety performance.
• There are no serviceable parts inside. If any maintenance service is required,
please contact our local distributor or the service personnel.
10. Safety Cautions for Inverter Maintenance
• It is recommended to check the inverter with testing equipment to ensure no
voltage and current.
• When conducting electrical connection and maintenance, post a temporary
warning sign or put up barriers to prevent the unrelated personnel from entering
the electrical connection or maintenance area.
• An improper operation of the inverter may cause personal injury or equipment
damage.
• It is recommended to wear an antistatic wrist strap or avoid unnecessary contact
with the circuit board.
-4-
WARNING
Once an accident occurs, it must be handled by professional and
technical personnel. Improper operations would cause more serious
accidents.
WARNING
Do NOT touch or open the shell after the inverter is powered off within
ten minutes.
To Next Page
Loading...
