The IPT series, a high-frequency sine wave inverter, adopts a fully digital intelli-
gent design and voltage-current dual closed-loop control algorithm. Featured with
fast response, high conversion efficiency, low Total Harmonic Distortion(THD),
and high reliability running, the IPT series can be widely used in the DC-AC
off-grid systems (such as vehicle systems, security monitoring systems, emergen-
cy lighting systems, household power systems, field power systems, and other
systems requiring higher power quality).
Features:
• Pure sine wave output
• Input to output electrical isolation
• Output power factor up to 1
• Input Protection: Low-voltage, Over-voltage
• Output Protection: Overload, Short circuit, Overheating
• RS485 com. port to realize remote monitoring①
• External switch design, matched with EPEVER products, to expand inverter
control function and reduce power consumption
• Diversified AC output sockets
• EN/IEC62109-1/2, EN61000-6-2/4, and FCC approved
① For inverters with 12V/24V input voltage, the RS485/RJ11 port has NO commu-
nication isolation design. This function (communication isolation design) is just for
inverters with 48V input voltage.
Overview
-5-
To Next Page
Loading...
