Ecoair APOLLO MK2 - Read Before Installation; Important Safeguards; Installation Requirements

© 2021 EcoAir - V2 7 All rights reserved (E&OE)
English
 The appliance must be installed in accordance with naonal wiring regulaons.
 The appliance is for indoor use only, and must not be installed in a high humidity area (i.e.
laundry room or wet room).
 Place the appliance on a even level oor that is strong enough to support the unit.
 Allow at least 50cm of air space on all sides of the appliance for good venlaon to avoid over-
heang.
 Only use the appliance within the operang temperature in an area where the temperature
will not fall below 16°C. Do note operate the appliance where the temperature is below 16°C
to avoid frosng of the coils consequently reducing its performance.
READ BEFORE INSTALLATION
FIG 1.
FIG 2.
FIG 3.
 Two or more people are required to move and install the appliance.
Do not pull the appliance along
by the power cord. See Fig 1.
Do not place objects on the appliance
or restrict air inlet / outlet. See Fig 2.
Do not use the appliance in humid or
wet environment. See Fig 3.
OK
INSTALLATION REQUIREMENTS:
IMPORTANT SAFEGUARD
Appliance in this picture is for illustraon purpose only
Appliance in this picture is for illustraon purpose only