Premier Tech Aqua 23/32 Polyethylene Ecoflo
®
Coco Filter– Installation Guide CAN/USA
339975 Rev. 5.0
• For the Ecoflo
®
Coco Filters polyethylene 5.7 and 7.3 models with an outlet adapter of 1½", use the screen
filter and the flexible outlet adapter with 1½" diameter. Keep the extension section, as shown below.
4. On the existing Ecoflo
®
Coco Filter pump, cut the ty-raps and untie the rope
attached to the pump. Unscrew the pump’s support and adapter as shown on the image below.
5. Verify if the TEFLON
®
is already on the fitting, if not put TEFLON
®
paste or roller on the pump’s threaded adapter.
Screw the screen filter assembly tightly on the pump and make sure to align the screen filter with the pump, as
shown below. Screw the support on the pump. Re-attach the rope on the handle of the pump and attach the
wire of the pump on the tree using the ty-raps provided in the kit.
To Next Page
Loading...