ECOFOREST Basic - Page 35

34
Gas
outlet pipe sections
Offset adjustment
“Depression” (PA)*
≤ 3m
+ 5.0
4m
+ 8.0
> 4m
+8.0
≥
Adjustment
≤ +14.0
Drawing 13
* Check modification over the offset with the stove working on level 1 and 9 during 1 hour , controllong the
right combustión of the stove ( no smoke, no depressure excess, etc).
4.30. Air inlet connected directly to the outside.
Drawing 14
It is highly recommended to place a grid in the intake pipe to allow the free air circulation and avoid the
entrance of unwanted objects or little animals like birds.
POWER CABLE, ROOM SENSOR AND WiFi ANTENNA CONNECTION.
A Ecoforest box is placed inside the fireplace. It contains the user manual, the installation and maintenance
manual, a keyboard and keyboard support, a WiFi antenna, a power cable, a room sensor and a cleaning brush. On
the Basic models, the keyboard must be mounted with its holder.
Drawing 15

Air intake tube.

Combustion air intake from the outside
.

Gas
output
>
2m.

Windbreak
.

Stainless steel hose clamp.

Keyboard. (Basic model).

Keyboard support. (Basic model).

Conexión de la sonda de ambiente.

Conexión de corriente
~
230/240V
-
50Hz.