Need help?Do you have a question about the ECOFOREST Eco I Insert and is the answer not in the manual?
Important warnings about general dangers associated with the appliance.
Emphasizes reading the manual for safe and optimal appliance use.
Visual guide to the various icons used on the device interface for functionality.
Explains the meaning of different icon colors and numerical statuses for the stove.
Details the components and functions of the control panel and its buttons.
Instructions for initial setup and synchronization of the stove.
Identifies and explains the key information displayed on the main screen.
Outlines the available options within the settings menu for configuration.
Provides critical advisories and precautions for operating the appliance.
Step-by-step guide for the initial power-on procedure.
Procedures for turning off, locking keyboard, and selecting language.
How to select fuel type and adjust operational offsets.
Introduces the two main operating modes: Power and Temperature.
Explains how the Power mode regulates output levels.
Details how the Temperature mode uses room sensors for regulation.
How to activate or deactivate daily programming schedules.
Instructions for setting up daily and weekly heating schedules.
How to view current operational data from the device.
Visual representation of the water system for water models.
Setting options for hot water and heating modes in water models.
Explanation of the EcoSILENCE mode for stoves.
Overview of the main dashboard accessible via web browser.
Configuring language, time, and heating/hot water modes via web.
How to select the fuel type through the web interface.
Detailed view of operational parameters and system data.
Explanation of different operating modes for air and water appliances.
Specific settings and behaviors for air model stoves.
Operation of water models with different hydraulic schemes.
Explains how room sensor settings affect operation.
Access to technical service for offset adjustments.
Detailed guide for setting up weekly schedules via the web interface.
How to program specific daily schedules or use templates.
Applying selected schedules to each day of the week.
Displaying and understanding the hydraulic system schematics.
Steps for configuring WiFi or Ethernet connections for internet access.
Best practices and advice for establishing a stable connection.
Detailed steps for setting up WiFi or Ethernet network connections.
How to access and control the stove remotely.
Common issues and solutions for WiFi connection problems.
Tools and methods for checking network signal quality and connectivity.
Steps to restore the stove's default WiFi settings.
Steps to clear and reboot the system after an alarm event.
To Next Page
General
