ECOFOREST Eco I Insert - 3.7. SWITCHING OFF, LOCK;UNLOCK, AND LANGUAGE; 3.10. FUEL SELECTION AND OFFSET ADJUSTMENT; 3.12. WORKING MODE OVERVIEW

40
3.7. SWITCHING OFF.
Drawing 7
3.8. LOCK OR UNLOCK THE KEYBOARD.
Drawing 8
3.9. LANGUAGE SELECTION.
Drawing 9
3.10. FUEL CHANGE.
To access this menu the stove must be turned off and showing no alarm (0 status).
Refer to section 3 of the “Installation and Maintenance Manual”. It must be taken into account the fact that a
new part may be needed to use the stove with other fuels, different to pellets. Please contact your dealer
before applying any changes.
Drawing 10
3.11. OFFSET ADJUSTMENT.
Such adjustments should be made only once in a while, since the stove adjusts itself automatically. In case you
need to change an offset, please contact your dealer.
IGNITION: The settings will affect states 3 and 4. Texts are shown in red.
Drawing 11
LEVEL: The settings will affect state 7.
Drawing 12
3.12. WORKING MODE.
To access this menu the stove must be turned off and showing no alarm (0 status).
The electronics work in two modes: Power or temperature.