ECOFOREST Eco I Insert - 3.17. HOT WATER; HEATING MODE SELECTION. (ONLY WATER MODELS).

43
Heating
HSW + Heating
HSW + Buffer tank
Buffer tank
Drawing 22
Drawing 23
Drawing 24
Drawing 25
Multi-zone*
Optional
Probe configuration
Thermostat
configuration
Drawing 26
3.17. HOT WATER / HEATING MODE SELECTION. (ONLY WATER MODELS).
To access this menu the stove must be turned off and showing no alarm (status 0).
Only for stoves whose Hot Water+ Heating is electronically operated by 3-way valves.
Drawing 27
Real-time value.
Modified by user.
Modified by S.A.T.

Feed water temperatura.

Return water temperature.

Ambient temperature / buffer tank.

Instruction ambient temperature / buffer
tank.

Instruction DHW temperature.

DHW tank temperature.
ON / OFF:
With or without demand in the zone
HEAT SUP.
Drive temperatura to the zone
VALVE
Zone Valve Opening Percentage
PUMP
Zone pump operating percentage
SETPOINT
Zone setpoint temperature with room probe
ROOM
Zone temperature with room probe.
AC+CAL
Feeds hot water and heating. Priority given to
hot water.
ACS
Only feeds heating.
CAL
Only feeds hot water.