Screw the Wi-Fi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.
Drawing 16
Place the magnet connection base with the antenna where appropriate. When possible, avoid the presence
of metal sheets around the antenna as the WiFi signal might be distorted.
WiFi plan view with no metal object
5. CLEANING AND MAINTENANCE.
To ensure the correct operation of your stove, the following Cleaning and maintenance operations are
necessary at the indicated frequency. The stove must always be cold.
The deterioration of the stove parts by a lack of cleaning involves the loss of the two-year warranty offered
by ECOFOREST (see warranty section).
DAILY CLEANING WHEN THE STOVE IS COLD.
5.1. Heat Exchanger. (Only Vigo II model)
Pull the drawers of the rake-this shall be done while the glass door closed in order to reach the ash inside the
stove. This shall be done every day when the stove is cold.
Drawing 17
5.2. Burning pot & Burning pot holder.
Clean the burning pot, check its holes and vacuum the burning pot holder. After cleaning, replace the burning
pot correctly.
To Next Page
Loading...
