ecofort ecodry CaveMaster - App Connection Methods

ENGLISH
65
App Connection:
Method 1: Connect via Bluetooth
Activate Bluetooth on your mobile phone or other device.
When the Wi-Fi indicator on the unit ashes, open the “ecofort SMART”
App and choose “Add new device”, the unit will connect via Bluetooth
automatically.
Method 2: Connect via Wi-Fi
When the Wi-Fi indicator on the unit ashes, on your smartphone or
tablet select “Add Device”, category “Dehumidier” and “CaveMaster”.
Check the status of the Wi-Fi indicator on the unit; If the Wi-Fi indicator
ashes, please conrm and press “Continue”.
Enter name and password of your Wi-Fi network, conrm and wait 1-2
minutes for connection and then press “Finish”.
Note: Once the unit has been successfully connected, the Wi-Fi
lamp stays lit. Now you can operate the unit by using the app.
Note: Press and hold the Auto-button for about 5 seconds to
disconnect the unit, the Wi-Fi indicator lamp will ash until re-
connection or will fully turn off after 3 minutes if no connection
has been established.