To Next Page
L
Lee CookAug 8, 2025
What to do if my ECOGENICA EG-215FR290 shows high voltage switch protection?
- GgabrielleowensAug 8, 2025
If your ECOGENICA Heat Pump indicates high voltage switch protection, power it off and then power it back on.
What to do if my ECOGENICA EG-215FR290 shows high voltage switch protection?
If your ECOGENICA Heat Pump indicates high voltage switch protection, power it off and then power it back on.
What to do if my ECOGENICA EG-215FR290 Heat Pump shows low voltage switch protection?
If your ECOGENICA Heat Pump indicates low voltage switch protection, power it off and then power it back on.
What to do if my ECOGENICA Heat Pump has a water tank temperature sensor failure?
In case of a water tank temperature sensor failure in your ECOGENICA Heat Pump, the system should automatically recover.
Overview of Ecogenica heat pump technology and its benefits.
Explanation of how the heat pump extracts heat and heats water.
Details on the use of R290 as an environmentally friendly refrigerant.
Visual breakdown of the heat pump unit's external and internal parts.
Specifications and dimensions for the water tank and heat pump unit.
Schematic representation of the electrical circuit for the heat pump.
Crucial safety alerts regarding operation, installation, and electrical hazards.
Important precautions for safe handling, operation, and maintenance to prevent injury.
Guidelines for safely unpacking, handling, and moving the heat pump unit.
Recommendations for selecting an optimal and safe location for installation.
Diagram illustrating the water and refrigerant piping connections.
Guidance on unit placement, water tank setup, and pipe connections.
Procedures for non-standard installations and extension requirements.
Instructions for safe and compliant electrical wiring and connections.
Steps for initial system checks, trial runs, and debugging before operation.
Procedure for safely powering on the unit and initial observations.
Guidelines for electricians performing service and repair on electrical components.
Procedures for technicians servicing the refrigeration system safely.
Information on performance variations and system protection modes.
Instructions for adding refrigerant based on pipe length.
Explanation of the unit's display icons and their meanings.
Description of the buttons and functions on the control panel.
Step-by-step guide for operating the heat pump using the control keys.
List of error codes, their heat pump status, and notes for diagnosis.
Solutions for common problems, including reasons and phenomena.
Instructions for cleaning the heat pump unit, focusing on the evaporator.
Procedures for cleaning the water tank and checking/replacing the anode.
Guidance on periodic operation and replacement of the PTR valve.
Requirements for water quality and checks for unit damage.
Terms, conditions, and specific exclusions that may void the warranty.
Details on the duration of parts and labour warranty for residential and commercial applications.
General
