2
- “Pulse Feed” of detergent provides overshoot control when the wash
tank concentration is near the desired set point.
• A Timed Mode that is available for alternate detergent control when not
using the probe.
• A Detergent Manager that monitors probe control dispensing and
automatically switches to a base lined feed condition when a dispensing
error is detected.
Rinse Injector System Features
The Rinse Injector System features include:
• Double roller peristaltic pump.
• Squeeze tubes with different delivery rates for high or low volume
installations.
• Variable speed DC motor, 8 - 30 RPM.
• Adjustable run time and start delay (on door machines)
• Optional Pressure Switch for alternate rinse signal input.
• Rinse Manager to disable the rinse injector system during a dish machine
fill (on automatic fill dish machines).
• Pump prime capability
Sanitizer Injector System Features (optional)
The Sanitizer Injector System features include:
• Double roller peristaltic pump.
• Squeeze tubes with different delivery rates for high or low volume
installations.
• Variable speed DC motor, 8 - 30 RPM.
• Adjustable run time and start delay
• Pump prime capability
To Next Page
Loading...