The Airspexx unit must be placed
surface. For DS2 place unit on
rycan.
Put the suction lance in a 20L can
with Airspexx disinfectant. Always
be aware that the suction lance
touches the bottom of the can.
Connect compressed air.
Connect mains voltage.
To start up the Airspexx push the
green button. After a few seconds
the unit starts up (depending on
6. Operation
7. Maintenance
The Airspexx unit is maintenance
free.
clean the nozzle.
outlet (always use gloves in case
by rinsing the dosing line with air.
lowed by authorised personnel.
Safety instructions
regulations.
Always disconnect from power supply before opening
machine.
10
To Next Page
Loading...
