A single pole main switch should be
installed close to the Airspexx unit
1. Security Advice
Read and understand this instruc
tion sheet prior to installation and
Observe personal protection in
regard of chemical products dur
repair. Read product label and
MSDS sheet.
Contact Ecolab for MSDS sheet.
2. Description
The Airspexx DS is a unit for dis
pensing using an Airspexx disinfect
ant.
aerosoles through an air nozzle.
The unit is available both mounted
on the wall and as a mobile unit.
controller and a suction lance with
adapter for a 20L can. Airspexx
DS1 is mounted on a trolley. Air
spexx DS2 is mounted on the wall
or on a hand hold frame.
The standard output setting of the
unit is 200 ml/hour (using 2 bar air
nozzle is only allowed by authorised
personnel.
The controller consists of a display
for setting the Airspexx features
with regulator which ensures the
pcb board which is the power sup
ply to the display and air valve and
connection of suction lance.
3. Location
The Airspexx must be placed in a
much free space as possible
around the unit.
4. Air
nippel compatible with SWL 520
series.
110002990C
Safety instructions
Only authorized customer service
personnel shall under
have to be familiar with all appli
cable safety regulations.
Always disconnect from power
supply before opening machine.
.
5. Power supply
9
To Next Page
Loading...
