Ecolab EcoPro-ES-00510X-PFC-00S-1S-S0 - Flow Rate: 50 L;H, Metering Back-Pressure: 1 Mpa (10 Bar); Flow Rate 120 L;H, Metering Back-Pressure: 0.3 Mpa (3 Bar)

90 pages

To Next Page

To Previous Page

13.9.4 Flow rate: 50 l/h, metering back-pressure: 1 MPa (10 bar)

DV Metering volume [l/h] DP Metering back-pressure [bar]

13.9.5 Flow rate 120 l/h, metering back-pressure: 0.3 MPa (3 bar)

DV Metering volume [l/h] DP Metering back-pressure [bar]

Technical specifications

82417102264 Rev. 5-01.2019

Main Page

Table of Contents2
General Information5
Information on User Manual5
Availability and Updating of the Operating Instructions5
Call up Operating Instructions with Smartphone6
Article Numbers / EBS-Article Numbers6
Copyright6
Symbols, Highlighting and Enumerations6
Transport8
Packaging9
Storage10
Identification of the Installation - Nameplates10
Warranty11
Manufacturer's Service and Contact Address11
Safety12
General Safety12
Proper Use12
Reasonable Foreseeable Incorrect Use13
Unauthorised Modification and Spare Parts Manufacture13
Lifetime14
Safety Measures Taken by the Operator14
Workforce Requirements14
Personal Protective Equipment (PPE)15
Explanation of the Safety Symbols Used15
Indications of Risks16
Environmental Protection Measures19
Obligations of the Operator20
Installation, Maintenance and Repairs20
Package Content22
Functional Description24
Features - 'Ecopro25
Description of the Pump26
Identification of the Pump - Type Plates26
Control Elements 'Ecopro26
Connection Sockets / Cable Bushings27
Pump Head Variants28
Assembly, Installation, Modification and Upgrades29
General Information and Safety29
Assembly Variants31
Stand Mounting or Floor Mounting32
Wall Mounting33
Installation34
Hydraulic Installation34
Installation Examples35
Connection of the Suction and Pressure Lines (Dosing Lines)37
6.3.3.1 Pipe and Hose Connection with Integrated Support Sleeve38
6.3.3.2 Pipe and Hose Connection with Tapered Part39
6.3.3.3 Pipe and Hose Connection with Attachment Nipple and Hose Clamp40
6.3.3.4 Pipe and Hose Connection with Female Coupling41
Electrical Installation42
6.3.4.1 Terminal Assignment - External Enable Signal43
Start-Up44
Initial Start-Up of the 'Ecopro45
Auto Start Function46
Terminal Assignment 'External Enable"' 'Ecopro47
Calibration on Initial Start-Up48
Operation49
Switching the Pump on and off49
Setting of the Capacity / Flow Rate50
Setting / Changeover of the Viscosity50
Changing a Container - Empty Signal51
Maintenance52
Service Position53
Maintenance Table54
Replace the Suction / Pressure Valve and Metering Cartridge55
Installing the Dosing Valve in the Correct Position56
Changing the Valve Cartridges (V3 Type)56
Replacing the Pump Head and Diaphragm57
Pump Head Size 5 L/H and 11 L/H58
Pump Head Size 30 L/H and 50 L/H59
Pump Head Size 120 L/H60
Consumables and Spare Parts61
Wearing Parts61
Set of Wearing Parts 5 L/H and 11 L/H61
Set of Wearing Parts 30 L/H, 50 L/H and 120 L/H62
Spare Parts62
Ecopro Control Unit62
Pump Heads64
10.2.2.1 Replacement Part Module: Pump Head 5 L/H64
10.2.2.2 Replacement Part Module: Pump Head 11 L/H65
10.2.2.3 Replacement Part Module: Pump Head 30 L/H and 50 L/H66
10.2.2.4 Replacement Part Module: Pump Head 120 L/H67
Repair, Conversion, Upgrade68
Repair68
Replacing the Control Unit68
Modification/Upgrade69
Modification - Turning the Pump Head69
Modification - Change from Stand Mounting to Wall Mounting70
Upgrading - from 'Ecopro' to 'Ecoadd71
Operational Malfunctions / Troubleshooting72
General Troubleshooting and Fault Rectification73
LED - Fault Messages73
Technical Specifications74
Packaging74
Equipment Marking / Type Plate74
Ecopro' Pump Key75
Pump Key Group I75
Pump Key Group II76
Pump Key Group III76
Pump Key Group IV76
General Data77
Electrical Data78
Tightening Torques78
Materials79
Dimensions79
Mounting Plate79
Ecopro Metering Pump80
Metering Capacity Diagrams/Flow Rates80
Flow Rate: 5 L/H, Metering Back-Pressure: 1 Mpa (10 Bar)80
Flow Rate: 11 L/H, Metering Back-Pressure: 1 Mpa (10 Bar)81
Flow Rate: 30 L/H, Metering Back-Pressure: 0.3 Mpa (3 Bar)81
Flow Rate: 50 L/H, Metering Back-Pressure: 1 Mpa (10 Bar)82
Flow Rate 120 L/H, Metering Back-Pressure: 0.3 Mpa (3 Bar)82
Decommissioning / Dismantling / Environmental Protection83
Shutting down83
Dismantling84
Disposal and Environmental Protection85
EC Declaration/Declaration of Conformity86
Index87

Ecolab EcoPro-ES-00510X-PFC-00S-1S-S0 - Flow Rate: 50 L;H, Metering Back-Pressure: 1 Mpa (10 Bar); Flow Rate 120 L;H, Metering Back-Pressure: 0.3 Mpa (3 Bar)

Table of Contents