NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
DANGER!
Damage and injuries may occur if installation is carried out
incorrectly.
– All installations must only be performed by authorised and trained
specialist personnel in accordance with the applicable local regulations.
– Safety regulations and prescribed protective clothing when handling
chemicals should be followed. Attention must be paid to the information
included on the product data sheet for the metering medium used.
n The metering pump should be fitted in an easy-to-access, frost-free location.
n The ambient temperature must not exceed +40° C.
n The mounting position of the device must be horizontal.
n The pump must be securely screwed to the bracket or the container using the drill
holes provided.
Installation scheme / Example:
Fig. 1: Installation diagram
1 Overflow valve
2 Pressure control valve
3 Replacement method: Multifunction valve
4 Suction pipe / bottom admission valve
Safety
7 MAN033535 Rev. 06-04.2020
To Next Page
Loading...
Need help?
General
