Ecomax ECA80 - User Manual

WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to
follow the safety rules and other basic safety precautions may result in serious personal injury.
Save this instructions in a safe place and on hand so that they can be read when required.
JUMP STARTER
Model: ECA80

Summary

Product Overview and Setup

Product Layout

Overview of the jump starter's components and features.

Operation Guidance

Digital Display Indicators

Explains the indicators on the digital display for power and functions.

Charging the Epower Unit

Steps to charge the Epower unit using a USB charger.

12 V Vehicle Jump Starting

Steps for connecting the jump starter to a 12V vehicle battery.

Jump Start Status Lights

Explains the meaning of GREEN, RED lights and buzzing for jump-starting.

Troubleshooting Jump Start Indicators

Details scenarios with no lights and no buzzing during jump-starting.

Charging Mobile Devices

Steps for charging external devices like phones and tablets.

Product Details and Support

Parts List

Lists all included components and their quantities.

Technical Specifications

Details product dimensions, weight, battery, and performance specs.

Frequently Asked Questions (FAQ)

Answers common questions about operation, charging, and lifespan.

Troubleshooting Common Issues

Provides solutions for common operational issues.

Safety and Compliance

Toxic and Harmful Substances

Details the composition of hazardous substances according to standards.

General Safety Warnings

Crucial safety instructions and precautions for using the unit.

Warranty Information

Limited Warranty Terms

Outlines the terms and conditions of the product warranty.

Warranty Claim Process

Provides specific warranty details and contact information for claims.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Charging the EPOWER
5. Jump Starting a 12V Vehicle
6. Charging Cell Phones or Tablets
7. LED Flash Light
8. Maintenance Features & Warnings
9. Troubleshooting (No response when pressing the switch button)
10. Warranty Information
11. ALTON INDUSTRY LTD. GROUP 2-YEAR LIMITED WARRANTY

This document describes the ECOMAX Jump Starter, model ECA80, a portable power bank designed for jump-starting vehicles and charging electronic devices.

Function Description:

The ECOMAX Jump Starter serves as a multi-functional power source. Its primary function is to jump-start 12V vehicles with a starting current of 350A and a peak current of 1500A. It also features a Quick Charge output port (5V=3A; 9V=2A; 12V=1.5A) and a PD30W In/Output port (5V=3A, 9V=3A, 12V=2.5A, 15V=2A, 20V=1.5A) for charging mobile phones, tablets, and other electronic devices. The device includes an LED flash light with four modes: normal, strobe, SOS, and off.

Important Technical Specifications:

• Model: ECA80
• Dimensions: 186 x 98 x 37mm
• Weight: 590g
• Battery Capacity: 15000 mAh (55.5 Wh)
• Output (Quick Charge): 5V=3A; 9V=2A; 12V=1.5A
• Output (PD30W): 5V=3A, 9V=3A, 12V=2.5A, 15V=2A, 20V=1.5A
• Input (PD30W): 5V=3A, 9V=3A, 12V=2.5A, 15V=2A, 20V=1.5A
• Start Current: 350A
• Peak Current: 1500A
• Full Charging Time: Approximately 2 hours
• Operating Temperature: -20°C to 60°C
• Battery Type: Lithium-based battery

Usage Features:

The device features a digital display that shows the battery's power percentage. It indicates "IN" when the PD30W charging function is active, "OUT" when the PD30W output function is in use, and "OUT Quick Charge" when the 5V2.4A/fast charge output function is active.

Charging the EPOWER:

1. Plug a USB charger cable into any working USB output port.
2. Connect the PD30W connector to the EPOWER host. The device automatically powers off when charging is complete or when no load is detected. Full charging takes approximately 2 hours via the PD30W input port.

Jump Starting a 12V Vehicle:

1. Connect the blue plug of the intelligent jumper cable fully into the host, ensuring the Cable Indicator is off.
2. Connect the Red Clamp to the positive (+) battery terminal and the Black Clamp to the negative (-) battery terminal.
3. Follow the instructions provided by the Cable Indicator:
   • GREEN LIGHT on: Indicates a correct connection and working circuit. The engine can be jump-started directly.
   • RED LIGHT on with buzzing: Indicates an incorrect connection. Correct the clamps as per step 2 and wait for the GREEN LIGHT to turn on before starting the engine.
   • GREEN LIGHT blinking: Indicates a low vehicle battery. Press the "BOOST" button, wait for the GREEN LIGHT to become solid, then start the engine within 30 seconds.
   • No Lights on, No buzzing: Indicates a potentially damaged vehicle battery. After confirming correct clamp connection, press the "BOOST" button, wait for the GREEN LIGHT to turn on, then start the engine within 30 seconds.
4. Start the vehicle.
5. Once the vehicle is started, remove the jumper cable from the vehicle battery. Leave the vehicle's engine running. The device can jump start a 3.0L gasoline vehicle approximately 15 times on a full battery. Do not jump start more than 3 times in a row to prevent overheating; allow a two-minute interval between starts.

Charging Cell Phones or Tablets:

1. Plug the switch cable into the Quick Charge output port.
2. Select the appropriate connector and connect it to your mobile phone or tablet.
3. Touch the switch button; the device will automatically recognize suitable parameters and begin charging.

LED Flash Light:

Press the switch for 3 seconds to activate the LED flash light. Subsequent slight presses will cycle through the modes: normal, strobe, SOS, and off.

Maintenance Features & Warnings:

• Storage: Store in a safe place and on hand for easy reference. Do not store in locations where the temperature may exceed 60°C. Charge only at ambient temperatures between 0°C and 45°C.
• Battery Life: The EPOWER typically lasts 3-5 years under normal conditions. The battery storage can remain for 6-12 months, but it is recommended to recharge every 3 months.
• Safety Precautions:
  • Read the instruction manual carefully before use.
  • Do NOT use in place of a vehicle battery or as a toy.
  • Close supervision is necessary when used near children.
  • Only jump-start 12V vehicles.
  • Do NOT use attachments not recommended or sold by the manufacturer.
  • Do NOT connect the two clamps together.
  • Ensure no corrosion or foreign matter at the interface before starting.
  • Remove the product from the car battery within 30 seconds after starting the car to prevent damage.
  • Do NOT use the jumper cable to charge other equipment.
  • Do NOT expose the product to rain, water, extreme heat, or fire.
  • Do NOT operate in explosive atmospheres.
  • Ensure someone is within voice range when working with batteries.
  • Remove personal metal items (rings, bracelets, necklaces) when using the product.
  • Pull the plug, not the cord, when disconnecting the power pack.
  • Do NOT use a damaged or modified battery pack or appliance.
  • Charge only with the provided charger or one with the same standard as the host input port.
  • Do NOT charge the unit immediately after jump-starting a car.
  • Do NOT use the unit to jump-start a vehicle while charging its internal battery.
  • In case of battery leakage, do not handle with bare hands. Wash skin with soap and water immediately if contact occurs. Rinse eyes with cold running water for at least 10 minutes and seek medical attention immediately.
  • Dispose of the product according to local regulations at the end of its life.

Troubleshooting (No response when pressing the switch button):

• Cause: Low voltage protection of EPower is started.
• Remedy: Plug the adaptor into the Quick Charge input port to activate.

Warranty Information:

A limited warranty of 6 months from the date of purchase covers defects in material and workmanship. The warranty is valid with the original receipt and is void if the serial number, date of purchase, or label has been removed. It does not cover damage from normal wear and tear, physical abuse, improper installation, misuse, modification, or unauthorized repairs. The manufacturer is not responsible for loss or damage during shipment or due to force majeure, nor for incidental or consequential damages. Warranty claims are limited to repair or replacement of the defective product at the manufacturer's discretion. Repaired or replaced products are covered for the remaining warranty period. Consumable components like batteries are not covered. The device includes Overcharge and Overdischarge Protection, Fuse Protection, and Against-reverse Plug protection.

ALTON INDUSTRY LTD. GROUP 2-YEAR LIMITED WARRANTY:

This separate warranty covers defects in materials or workmanship of the enclosed product for 2 years. It does not cover problems caused by misuse, abuse, accidents, or acts of God. Consequential and incidental damages are not covered. Coverage terminates upon transfer of ownership. For defective products, submit a copy of the receipt and call 1-888-899-0146 for instructions before returning. The manufacturer will inspect the product within 72 hours and reserves the right to repair or replace it with a similar but not exact product. This warranty grants specific legal rights, which may vary by state.

Ecomax ECA80 Specifications

General

Brand	Ecomax
Model	ECA80
Category	Remote Starter
Language	English