Econ OP320 - Page 34

Page
34
of
86
Pages
Set the screen
No.
to be 10, enter the
screen description
“
set
parameter”.
Click
[
OK
] button to confirm. After that, there
will be
the content of screen
attribute
in
the
right
bottom of the screen. Set
the
“
Previous Scr
een No.
”
to be 0, set the
“
Next screen No.
”
to be 20. Then in the normal display status (not in the status of data setting), click
“
∧
”
key
to directly enter the main menu screen, click
“
∨
”
key to directly enter the state setting
screen
At
the
normal
position,
place
text “the current value”, “the target value” , “the production of
Class A”, “the production of Class B”, “the production of Class C”.