Econ OP320 - Alarm List

Page
52
of
86
Pages
2
-
2
-
14
A
larm list
Each project of
the
OP320 can set a group of alarm list information. A piece of alarm
information corresponds with a
internal
relay. The definition No. is sequential. The
internal
relay
’
s initial address can be set by the user accordin
g to the actual program. When any of
the
internal
relay turns to ON from OFF, that means that when there is an alarm,
the
OP320
will auto
matically
pop
up
the alarm display screen, then display
s
the alarm information in
the first line. When another
internal
relay be ON, display a new alarm information in the
second line.
Click the
button,
there will pop
up
t an
alarm list dialog box: